3M Accuspray Atomizing Head Refill for 3M PPS Series 2.0, Size 1.22 mm, Blue
3M Accuspray Atomizing Head Refill Nozzles for PPS 2. 0 are designed for the 3M Accuspray paint gun and PPS 2. 0 Spray Cup System. Replacement nozzles come in a range of sizes so you can spray numerous applications with one gun. The red 2. 0 mm size is ideal for heavy-duty applications like gelcoats, adhesives, undercoats and industrial coatings.
Refill nozzles can be used 5 to 10 times, then removed and replaced, giving you the performance of a new gun on demand and at a fraction of the cost. 3M Accuspray Spray Gun System with PPS 2. 0 is a convenient all-in-one solution for measuring, mixing, filtering and spraying paint materials. Unlike with conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint. And with a fresh lid and liner for each mix, there’s less risk of outside contamination. You can increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems. PPS 2.0 features improvements like a quarter-turn locking collar with each lid, domed lid design for better spray performance and wider lid fluid spout. Each paint cup has convenient printed-on universal mix ratios for accurate mixing and a clear access window for easy visibility.
- Refill nozzels for spray gun – Replacement atomizing heads for use with the Accuspray handheld HVLP paint gun and PPS 2.0 Spray Cup System with disposable lids and liners
- Refill nozzles can be used 5 to 10 times, then removed and replaced for the performance of a brand-new gun
- Many Sizes – Other sizes let you easily spray paints, stains, varnishes, primers, clearcoats, gelcoats, undercoats, sprayable adhesives and more, for a range of applications from one gun
- Easy to Clean – With Accuspray, the paint doesn’t run through the gun it flows directly from the cup into the atomizing head and is sprayed onto the surface. This eliminates a huge amount of the cleanup and solvent use that conventional paint guns require
- Adjustable Spray Pattern – Simply twist the clear air cap 45 degrees to change your spray pattern from horizontal to vertical and back again for the most efficient paint application
- Convenient Design – See-through nozzles make it easy to tell when the heads are clean
- For industrial/occupational use only. Not for consumer sale or use.
| Type | Atomizing Head |
|---|---|
| Size | 1.22 mm |
| Style | HVLP |
| Brand | 3M |
| Series/Sub-Brand | PPS Series 2.0 |
| Material | Mixed |
| Manufacturer Code | 26582 |
- Only one PPS™ Series 2.0 cup for mixing and spraying
- Enables painters to mix less paint
- Use corresponding lids and liners for size of application
- Up to 70% savings of cleaning solvent
- Closed system - no outside contamination
- Faster system - from mixing to disposal
- Less operator exposure to solvents and reduction in VOCs
- Spray gun functions at any angle
- Available in multiple size cups
- Use the 3M™ PPS™ Series 2.0 Shaker Core to remove the lid easily
- When removing the lid and liner from the hard cup, twist lid to unlock, place fingers through hole in bottom of cup and push liner upwards, releasing lid and liner together.
- Use the wide base on your 3M™ PPS™ Series 2.0 Cup Sealing Plugs to stand your cups upside down when not in use, helping to keep the filter mesh wet.
- Eliminate traditional mixing cups and filters by mixing materials right inside your 3M™ PPS™ Series 2.0 Cups. Each lid contains a clean, welded-in filter.
- Stock all 5 Kit sizes to always have the right size cup for the job, reducing your cost per use.
- Maintain Compliance with EPA 6H Rule by using the 3oz/90mL size 3M™ PPS™ Series 2.0 Cups.
- Keep your red 3M™ PPS™ Dispensers. They still work with all 3M™ PPS™ Series 2.0 Lids and Liners.