3.5QT USG "SHEETROCK" REDI-MIX JOINT COMPOUND

Fast, easy application helps reduce labor time

Wide variety of formulations and styles to fit numerous interior finishing needs

Consistent high-performance results meet job requirements with every use

Convenient to use - most products require minimum preparation saving time and reducing waste

Great bond, hard finsh

Cover joint with a thin layer of compound and embed paper tape, leaving about 1/32 in. of compound under feathered edge. Let dry and sand lightly. Apply second coat, feathering approximately 2 in. beyond fi rst coat. Let dry, then dry trowel/scrape or sand lightly to remove tool marks as required, and then apply third coat, feathering 2 in. beyond second coat. Sand lightly as required when dry. Finish fastener heads, corner bead and inside corners as required with at least three coats of joint compound, feathered out onto panel faces and fi nished to a smooth surface.

interior plaster and masonry not subject to moisture