Chat with us, powered by LiveChat

18mm (3/4 in.) Imported Birch Plywood, 4 ft. x 8 ft.

In stock
Only %1 left
SKU
3448IB
 
 
Imported Birch Plywood is constructed using a veneer core. Birch plywood panels are lightweight, dimensionally stable and have excellent screw-holding capacity. The 18MM (¾ in.) C2 - 7 Ply Imported Birch Plywood is perfect for those projects that require structural strength, but not a premium finish. We recommend this item be painted and not stained or clear-coated. May contain knots and uneven graining.
As low as $91.00
Piece
  • A1 Grade 5-Ply Birch plywood
  • Cabinet & furniture grade
  • Excellent strength and dimensional stability
  • Great screw, nail, glue and staple holding ability on the face; mechanical fasteners do not hold as well on the butt edges and ends
  • Sanded with 120-150 Grit for a smooth stainable/paintable surface
  • Brand name / grade may vary based on availability and stocking location
More Information
Type Sanded Plywood
Thickness 1/2 in.
Brand Selected Brands
Material Birch
Plywood Width Length 4 ft. x 8 ft.
Plywood grades are (best to worst) A, B, C and D for face or front face. The back grades are (best to worst) 1, 2, 3, and 4. Plywood grades of A1, A2, B1, B2 are a good two-sided product and would be used where both sides are going to be seen. The backside (number grade) does have a few more blemishes than the front. A3, B3, C3 are for plywood that will be seen from one side, but the backside must be clean, although there may be some stain or discoloration on the back, spliced veneer, and so on. One might use this material for the sides of a dresser (who looks inside?), for drawer sides, and shelving. A4, B4, C4 are a one-side-good product. The back may have open knots, filled knots, bad veneer joints or seams. This material will work well for drawer bottoms, and similar.
Write Your Own Review
You're reviewing:18mm (3/4 in.) Imported Birch Plywood, 4 ft. x 8 ft.
Your Rating