Sashco Through the Roof!, Elastomeric Sealant, Clear, 10.5 fl. oz.
When there’s a nagging roof leak that others can’t fix, or when you don’t want to take your chances, use Through the ROOF!® Its unique co-polymer rubber formula creates a permanent seal, even when applied in the middle of a rain storm. (It works great on dry surfaces, too.) Through the ROOF! will stick to almost any roofing surface – metal, plastic, asphalt, wood, concrete, and more. Plus, it won’t freeze. So go ahead and fix that gutter in a Minnesota winter.
$15.49
each
- Sticks to wet surfaces
- Excellent UV Resistance
- Super Elastic
- Strong tear resistance
- Water repellent
- Lasts 20x longer than asphalt roof cement
- Long 3-year shelf life
- Doesn’t crack, craze, or yellow (Clear*)
| Type | Sealant |
|---|---|
| Size | 10.5 fl. oz. |
| Color | Clear |
| Brand | Sashco |
| Material | Co-polymer Rubber |
| Manufacturer Code | 14010 |
Recommended for common roofing fixtures, including: Aluminum, brass, copper, galvaized steel, powder-coated metals, creamic tile, concrete, glass, mortar, polyisobutylene, stone, tile, vinyl, wood, stucco, terra cotta, steel, brick, asphalt shingles, acrylic & polycarbonate skylights. Anything not listed should be tested for adhesion compatibility before use.
Application:
- Large beads applied in hot weather (above 95ºF) may exhibit slight bubbling. For best results, apply out of direct sunlight.
- 0° to 140°F (-18° to 60° C) (Cartridge) 0° to 120°F (-18° to 49° C) (Brush)
- Surfaces must be clean and free of frost, loose materials, dust, etc.
- Prepare frosty or icy surfaces by cleaning with alcohol.
- Natural shrinkage may give some joints a concave appearance. Multiple applications may beneeded to fill the joint flat.
- If dirt or oils are present on the substrate, wash with any household cleaner, rinse to remove and allow to thoroughly dry.
- Remove any old caulk, especially silicone or silicone residue. Use a silicone remover.
- Close ventilation intakes on roof until solvent dissipates (approx. 12 hours).
- Flammable during early cure (approx. 24-48 hrs.)Fully cured in 1-2 weeks.
Dry Time: Full cure: 1 week (depending on temperature and humidity) Paintable: 1-2 days with water-based paint 1 week with oil-based paint
Clean Up: Tools: Mineral spirits or paint thinner Hands: Citrus-based cleaners
Write Your Own Review