Light Gypsum Board Sheetrock Drywall 1/2 in. x 4 ft. x 10 ft.
Gold Bond® BRAND High Strength LITE® is a specialty gypsum board that is formulated to be 25% lighter than original 1/2" High Strength Gypsum Board. The result is a superior board that is lighter in weight, sag resistant and easier to handle.
As low as
$22.69
Piece
- 25% lighter than original 1/2" High Strength Gypsum Board. Lighter weight results in easier handling.
- Can be installed on ceilings 24" o.c. using a water-based texture and overlaid insulation.
- Excellent working properties including improved score and snap, reduced dust and improved strength to weight ratio.
- Excellent sag resistance. Test results show overall sag on tested assembly to be equivalent to 5/8" Type X gypsum board.
- Features the GridMarX preprinted fastening guide on the board to allow for faster and more accurate installation.
- Edges are tapered, allowing joints to be reinforced
| Series/Sub-Brand | GOLD BOND® |
|---|---|
| Type | Drywall Sheet |
| Size | 4 ft. x 10 ft. |
| Thickness | 1/2 in. |
| Rating | Fire Resistant |
| Brand | National Gypsum Co |
| Material | Gypsum Core |
GridMarX provides quick identification and uniform nail/screw patterns. Use GridMarX to make accurate cuts without drawing lines. GridMarX guide marks run the length of the board at five points in 4" (102 mm) increments. Marks run along the edge in both tapers and at 16" (406 mm), 24" (610 mm) and 32" (813 mm) in the field of the board. The marks cover easily with no bleed-through using standard paint products.
Write Your Own Review