My Cart
You have no items in your cart.
Please wait...
Please wait...
Address: 181 West Ave, Darien, CT 06820
Address: 9 Taylor Ave, Bethel, CT 06801
Address: 355 Newbury St, Boston, MA 02115
Address: 25 E Industrial Rd, Branford, CT 06405
Address: 59-67 Federal Rd, Danbury, CT 06810
Address: 1139 Post Rd, Fairfield, CT 06824
Address: 848 Lafayette Rd, Hampton, NH 03842
Address: 386 Smith Ridge Rd, South Salem, NY 10590
Address: 85 Bradley Rd, Madison, CT 06443
Address: 149 Everett St, Middleboro, MA 02346
Address: 1193 Ashley Blvd, New Bedford, MA 02745
Address: 308 S Frontage Rd, New London, CT 06320
Address: 140 Danbury Rd, New Milford, CT 06776
Address: 201 Merrimac St, Newburyport, MA 01950
Address: 50 Needham St, Newton Highlands, MA 02461
Address: 14 Church Hill Rd, Newtown, CT 06470
Address: 28 Hope St, Niantic, CT 06357
Address: 149 Westport Ave, Norwalk, CT 06851
Address: 131 Boston Post Rd, Orange, CT 06477
Address: 58 Shops at Five Way, Plymouth, MA 02360
Address: 1037 Forest Ave, Portland, ME 04103
Address: 620 Peverly Hill Road, Portsmouth, NH 03801
Address: 35 Scamman St, Saco, ME 04072
Address: 153 Ocean St, South Portland, ME 04106
Address: 87 Harvard Ave, Stamford, CT 06902
Address: 921 High Ridge Rd, Stamford, CT 06905
Address: 160 Avon St, Stratford, CT 06615
Phone:(203) 814-3050
Store hours:
Mon - Fri7am - 5pm
SatClosed
SunClosed
HolidaysClosed
Set as default storeAddress: 921 White Plains Rd, Trumbull, CT 06611
Address: 14 Warren St, Waltham, MA 02453
Address: 877 Post Rd E, Westport, CT 06880
Address: 669 Silas Deane Hwy, Wethersfield, CT 06109
Address: 129 Danbury Rd, Wilton, CT 06897
Address: 116 Cummings Park, Woburn, MA 01801
Address: 412 Route 1, Yarmouth, ME 04096
The TimberTech® Classic Composite Series is bold, beautiful, and refined. Our most popular collection has rightly been dubbed the "Designer Series" of railing. Boasting multiple top rail and infill… Show more
The TimberTech® Classic Composite Series is bold, beautiful, and refined. Our most popular collection has rightly been dubbed the "Designer Series" of railing. Boasting multiple top rail and infill choices, this simple system gives you endless design options to make your outdoor living space truly yours. Take your outdoor space to the next level with bold details and a variety of design options in this railing series. This ensures easy and intuitive ordering. Designed to complement your deck as well as your home’s exterior.
Rail Pack Includes:
Top Rail not included. Post Sleeves, Post Caps, and Post Skirts must be purchased separately.
Actual Size: 2.5 in. x 68.4 in.
Show less| Type | Railing Kit |
|---|---|
| Color | Matte White |
| Length | 6 ft. |
| Height | 36 in. |
| Brand | Timbertech by Azek |
| Color Family | White |
| Finish | Matte |
| Material | Composite |
| Manufacturer Code | TCU36KIT6MW |
Follow these simple steps to build the Classic Composite rail system:
All sold separately Tools Required: Miter Saw, drill, measuring tape, caulk gun, 7/64 in. drill bit, 3/16 in. drill bit.
Measuring Your Railing Area : Measurements are from center to center of the posts. Rails are produced in 10 ft., 8 ft. and 6 ft. to allow for finished end cuts and angles. Determine how many 10 ft, 8 ft. and 6 ft. TimberTech Rail Sections you need and check to be sure you have all the components (and quantities) listed in the chart shown.
Prior to construction, check with your local regulatory agency for special code requirements in your area. Common railing height is 36 in. or 42 in.. TimberTech Railing 10 ft., 8 ft. and 6 ft. Rails are designed not to exceed 10 ft., 8 ft. and 6 ft. from center of post to center of post, respectively.
For all stair applications, maximum rail length must not exceed 91 in.. If using anything other than aluminum support rail, the maximum rail length must not exceed 91 in.. 4x4 lumber posts must be installed plumb and level with each other. Cut slowly, using a thin kerf, finish saw blade to avoid chipping. For all applications, a structural post must be used inside our Post Sleeve.
Installing Railing with Balusters for Classic Composite Series Be sure to cut Post Sleeves such that finished rail height is at least 36 in. high for a 36 in. rail application and 42 in. high for a 42 in. application.
For all rail installations, post and post covers must be plumb and aligned with one another. For Over-the-Post applications, it is critical that Posts be of a consistent height (e.g. the tops of all post sleeves are level and on plane with each other).
TIP: To ensure that the tops of all post sleeves are level, you may use a traditional 8 ft. level or a string line to establish a common level across all post sleeves and cut at that level. Alternatively, you may use a laser level to “shoot” a level mark on each post sleeve and then cut at that mark.
