Please wait...
Address: 181 West Ave, Darien, CT 06820
Address: 9 Taylor Ave, Bethel, CT 06801
Address: 355 Newbury St, Boston, MA 02115
Address: 25 E Industrial Rd, Branford, CT 06405
Address: 59-67 Federal Rd, Danbury, CT 06810
Address: 1139 Post Rd, Fairfield, CT 06824
Address: 848 Lafayette Rd, Hampton, NH 03842
Address: 386 Smith Ridge Rd, South Salem, NY 10590
Address: 85 Bradley Rd, Madison, CT 06443
Address: 149 Everett St, Middleboro, MA 02346
Address: 1193 Ashley Blvd, New Bedford, MA 02745
Address: 308 S Frontage Rd, New London, CT 06320
Address: 140 Danbury Rd, New Milford, CT 06776
Address: 201 Merrimac St, Newburyport, MA 01950
Address: 50 Needham St, Newton Highlands, MA 02461
Address: 14 Church Hill Rd, Newtown, CT 06470
Address: 28 Hope St, Niantic, CT 06357
Address: 149 Westport Ave, Norwalk, CT 06851
Address: 131 Boston Post Rd, Orange, CT 06477
Address: 58 Shops at Five Way, Plymouth, MA 02360
Address: 1037 Forest Ave, Portland, ME 04103
Address: 620 Peverly Hill Road, Portsmouth, NH 03801
Address: 35 Scamman St, Saco, ME 04072
Address: 153 Ocean St, South Portland, ME 04106
Address: 87 Harvard Ave, Stamford, CT 06902
Address: 921 High Ridge Rd, Stamford, CT 06905
Address: 160 Avon St, Stratford, CT 06615
Phone:(203) 814-3050
Store hours:
Mon - Fri7am - 5pm
SatClosed
SunClosed
HolidaysClosed
Set as default storeAddress: 921 White Plains Rd, Trumbull, CT 06611
Address: 14 Warren St, Waltham, MA 02453
Address: 877 Post Rd E, Westport, CT 06880
Address: 669 Silas Deane Hwy, Wethersfield, CT 06109
Address: 129 Danbury Rd, Wilton, CT 06897
Address: 116 Cummings Park, Woburn, MA 01801
Address: 412 Route 1, Yarmouth, ME 04096
Bring the advanced material technology in both the cap and core of TimberTech® decking to your backyard. TimberTech® AZEK® Decking offers up to 40% better slip resistance than competitors’ decking,… Show more
Bring the advanced material technology in both the cap and core of TimberTech® decking to your backyard. TimberTech® AZEK® Decking offers up to 40% better slip resistance than competitors’ decking, stays cooler on sunny days, and has superior resistance to the elements. Made from approximately 50% recycled material and significantly more sustainable than premium hardwood. From premium performance to stylish sophistication, TimberTech® decking is revolutionizing outdoor living with long-lasting, low-maintenance, and beautifully natural looking decking options. Forget curb appeal — it's all about porch appeal these days. Warm, natural-looking, and nuanced colors round out the Porch Collection to help create an inviting space to greet guests or simply lounge. With tongue and groove technology, these porch boards feature a tighter-fit between boards for a more polished look. Offered in both standard and wide width, you can make a style statement on your front porch.
Show lessType | PVC Porch Boards |
---|---|
Color | Slate Gray |
Length | 16 ft. |
Style | Tongue & Groove |
Brand | Timbertech by Azek |
Color Family | Gray |
Finish | Solid |
Material | PVC |
Manufacturer Code | ADCP13516SG |
Tools Required:
• AZEK® Porch can be installed using the same tools you would use to install wood porch products.
• Corded or cordless driver/screw gun may be used.
• Self-feeding screw guns can be used. Check with manufacturer for compatibility with AZEK® Porch.
• Miter saw with a fine-toothed, carbide tipped finish trim blade works well for cutting.
• As with installing a wood porch, safety glasses should be worn during the entire installation process.
Tools Required:
• AZEK® Porch can be installed using the same tools you would use to install wood porch products.
• Corded or cordless driver/screw gun may be used.
• Self-feeding screw guns can be used. Check with manufacturer for compatibility with AZEK® Porch.
• Miter saw with a fine-toothed, carbide tipped finish trim blade works well for cutting.
• As with installing a wood porch, safety glasses should be worn during the entire installation process.
• For best results, a power miter/compound miter saw with a fine-toothed carbide tip alternate top bevel blade is recommended (12 in. – 60 tooth minimum).
AZEK® Porch:
AZEK® does not recommend the use of rubber or vinyl products (welcome mats, planters, etc.) on porch boards. A reaction can occur that causes discoloration of the board under the rubber/vinyl product. This is a common caution for vinyl decking products.
Do NOT nail AZEK® Porch boards. Although AZEK® Porch is cooler to the touch than many other porch boards in similar colors, all porch products will get hot in the sun.
Additionally, the darker the porch color, the hotter it will feel. AZEK® does not recommend the use of rubber or vinyl products (welcome mats, planters, etc.) on porch boards. A reaction can occur that causes discoloration of the decking under the rubber/vinyl product. This is a common caution for polymer decking products.
Cutting or drilling metal should not be done on AZEK® Porch boards as metal shavings may be come hot and embed themselves into the boards. Always be sure to check and cut the factory cut ends of boards to ensure they are square.
Walking Surface and Grain Pattern:
AZEK® Porch planks are intended to be installed with the embossed wood grain side up. The non-embossed surface is not to be used as a walking surface. This applies to all porch surfaces.
Static Electricity:
The buildup or generation of static electricity is a naturally occurring phenomenon in many plastic based products such as carpeting, upholstery, and clothing, and can occur on alternative decking under certain environmental conditions.
Cantilevering:
For best results, don’t cantilever over 1/2 in.
Routing:
AZEK® Porch/Rim Joist Covers/Riser should not be routed. Color and Grain Patterns: AZEK® Porch is designed to mimic the look of real wood, and like real wood, there will be a slight difference in color and grain pattern from board to board. This is intentional and part of the manufacturing process, giving AZEK® Porch the most realistic and wood-like appearance possible. This variation is purely aesthetic and does not or will not affect the performance of the product.
Color and Temperature:
Although AZEK® Porch products are cooler to the touch than many other deck board products in similar colors, all decking products will get hot in the sun. Additionally, the darker the decking color, the hotter it will feel. Rooftops DO NOT attach porch boards to a floating sub-structure which is not mechanically fastened frequently and sufficiently to the building and roof deck.
Note: In areas with obstructed airflow such as roofs and on grade applications, a minimum of 1-1/2 in. sleeper system supported by and connected to the substructure over which the deck is built is required.
AZEK® Porch is NOT intended for use as columns, support posts, beams, joist stringers, guard railing or other primary load-bearing members. AZEK® must be supported by a code-compliant substructure.
While AZEK® Porch products are great for re-planking (removing old porch surface boards and installing AZEK® on a code-compliant substructure), AZEK® Porch boards CANNOT be installed on top of an existing porch.
AZEK® Porch is not intended to be waterproof and should not be used in any waterproof application. Caulks, adhesives or other similar products should not be used in the tongue and groove areas of AZEK® Porch.
Calculating Material Requirements:
To determine how much TimberTech® decking material you will need, start by calculating the square footage of your deck surface by multiplying length by width.
Once you know this number, divide it by the numbers provided below for 12 ft. boards, 16 ft. boards and 20 ft. boards. Once you know the square footage number, divide it by 5.5 for 12 ft. boards, 7.3 for 16 ft.boards and 9.1 for 20’ boards. When calculating the amount of decking you will need, it is recommended that you add roughly 10% to the total for a scrap factor.
Example: Length x Width = Total Square Footage Square Footage ÷ by 5.5 (12 ft.), 7.3 (16 ft.) or 9.1 (20 ft.) = Boards Needed (Round the number up) Boards Needed + 10% (Scrap Factor) = Final Number of Boards Needed (Round the number up)