A crystal-clear finish for high-wear interior wood surfaces. A crystal-clear, tough finish for high-wear interior wood surfaces like cabinetry, shelves, doors, furniture and even floors. Purity Interior Glacier will protect your wood, define it’s beauty and help to add dimension. For an exceptionally durable, long-lasting color choose a Purity Glacier solid color formula.
Purity Glacier is UV resistant, washable, environmentally friendly, low in VOC’s, high in solids and non-flammable with easy soap and water clean-up. Available in extra low luster, low lustre, satin and gloss finishes.
For optimum UV protection or if a special color or toning is desired, use a pigmented version of Sansin Purity Interior Stain as the first application.
Type | Interior |
---|---|
Size | Quart |
Color | Clear |
Coverage | 400-500 Sq. Ft. per gallon. |
Brand | Sansin |
Finish | Extra Low Lustre |
Material | Water-Based |
Manufacturer Code | 3330/0 |
Surface Preparation: Remove all hardware or cover hardware that cannot be removed. Surface must be dry and free of contaminants such as waxes, silicones, glues and dirt. Do not use steel wool or anything that may leave iron particulate on the wood surface. Repair any defects in the surface, such as holes and cracks using only quality, acrylic-based tinted, wood fillers to match the color of the project. Wood filler must be allowed to dry completely prior to sanding. Extra effort in sanding will pay off in aesthetics. Use 120-150 grit sandpaper and always sand with the grain for best results. Remove dust particles by vacuuming and wipe with damp cloth. Test formula on an inconspicuous wood surface to ensure proper color and penetration.
Application: For brush application add up to 5% water to Glacier. Do not add water if spraying. For spray application use conventional or air assist airless, avoid high sheer pumps. Contamination in pump can cause cratering or other surface issues. Equipment should be qualified before use. DO NOT SHAKE. Stir well before and during use. Apply the first coat of Purity Interior Glacier by sprayer or with a nylon polyester brush or a pad applicator. Spread the finish evenly. Purity Glacier has excellent leveling properties; be careful not to overwork the product.
Dry Time: Test formula on inconspicuous wood surface to ensure proper results. Allow 1 hour of drying in proper conditions when the temperature is 70°F (21°C) and the relative humidity is higher than 70%. If necessary, after the surface is completely dry, sand lightly using 220-320 grit sandpaper or a fine synthetic abrasive pad. Always sand with the direction of the wood grain. Vacuum the surface and wipe with a damp cloth/tack cloth to remove dust particles. Apply the second coat of Sansin Purity Interior Glacier, for additional protection or gloss, a third coat may be applied after 24 hours.
Coverage: 400-500 Sq. Ft. per gallon.
Clean Up: Soap and water.