Chat with us, powered by LiveChat

Old Masters Fast Dry Stain, Golden Oak, 1/2 Pint

In stock
SKU
OM602P
 
 
Designed for craftsmen, this fast drying, high quality interior oil-based stain applies easily and enhances the wood’s natural grain with its intensified depth of color and clarity. Fast Dry Stain is recommended for use on interior wood surfaces or surfaces on which the previous finish has been removed. This stain is preferred for hardwoods, such as oak, ash, walnut, and mahogany. Coverage: Approximately 500 square feet per gallon. Spreading rate will vary significantly depending on application method and condition of wood.
$12.49
each
Select a store
98 Available in stock
Delivery
Available
  • Add rich color and depth to a variety of surfaces, including wood, fiberglass, metal, and composition surfaces
  • Change existing colors on previously finished surfaces
  • Match color tone on different kinds of woods and non-porous surfaces, such as fiberglass
More Information
Type Fast Dry Stain
Size 1/2 Pint
Color Golden Oak
Brand Old Masters
Color Family Gold
Material Oil-Based
Manufacturer Code 60216
Where to Use: Experience optimal results on all interior wood surfaces, such as cabinets, doors, floors, furniture, and woodwork. Surface Preparation: The wood surface must be clean, dry, and free from dirt, wax, or grease. Sand the wood thoroughly - first with medium grit sandpaper, then progressing to a fine grit paper. Always sand in the direction of the wood grain. Sand smooth, then remove dust particles with a lint-free rag or a tack rag. If staining previously finished surfaces, first restore the surface to bare wood by completely removing the old finish, then follow the surface preparation directions listed above. Application: Stir well before and during use. Stain may be brushed, sprayed, or wiped onto the surface. Before the stain dries, wipe off excess stain with a soft cloth. Allow stain to dry thoroughly before applying topcoat. See TDS for more details. Drying Time: Oil-based finishes may be applied 30 minutes after wiping. Dry times may be extended due to humidity, low temperature, lack of air movement, excess stain application, or lack of penetration. Be sure surface is thoroughly dry before top coating. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.
Write Your Own Review
You're reviewing:Old Masters Fast Dry Stain, Golden Oak, 1/2 Pint
Your Rating