Milesi 2K Interior Acrylic Urethane Pigmented Sealer, White, 25 KG
Milesi LJR6AC2x series is an advanced two-component, non-yellowing acrylic-urethane pigmented sealer with extended pot life and simple 2:1 mix ratio. Recommended in systems where better adhesion, sanding, high clarity, and high build are desired.
Recommended for softwood, hardwoods, and MDF.
- Interior use only
- Catalyst sold separately
- Acrylic Urethane formulation
- Color: White
- Non-yellowing
- Must be intermixed with hardener/catalyst LNB6AA
| Type | 2K Sealer |
|---|---|
| Size | 25 KG |
| Color | White |
| Brand | Milesi |
| Material | Solvent-Borne |
| Manufacturer Code | LJR6AC25 |
Application Method: Airmix Spray or Hand Spray with 4-5 mils thick. Measure thickness with a mil guage. Check Technical Data sheet for recommended tip sizes, atomization pressure, and product pressure.
Pot Life: Hardener LNB6AA5, added 10% weight, 14% by volume, pot life of mixed material is 24 hours. LNB6AA5 hardener must be mechanically mixed into the resin.
Dry Time: Dust free 10 mins, To touch 40 mins, Hard dry 12 hours, Sandable after 3 hours. Room temperature drying ( 18-22°C / 64 – 72°F with 65-70% relative humidity) complete drying 12 hours.
Clean-Up: Clean up equipment immediately after use with acetone. Dispose of all cleaning materials and solvents in proper manner. Fluid lines can be flushed with a 1:1 mixture of water and isopropyl alcohol. When switching from water to solvent, flush with denatured alcohol or acetone after cleaning with water. This will attract any water left in the system. Then flush with the appropriate solvent to temper the gun.