Gypsum Board Sheetrock Drywall 1/4 in. x 4 ft. x 8 ft.
Gold Bond® BRAND Gypsum Board panels consist of a fire-resistant gypsum core encased in heavy natural-finish, 100% recycled paper on the face and back sides. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut and finished smooth. Lightweight, low-cost utility gypsum panel for interior use as a base layer for improving sound control in double-layer steel and/or wood stud partitions.
As low as
$18.59
Piece
- Lightweight, cost-efficient material that readily accepts a wide range of decorative finishes.
- Gypsum Board is easily cut for quick installation, permitting painting or other decoration and the installation of metal or wood trim almost immediately.
- The gypsum core will not support combustion or transmit temperatures greatly in excess of 212°F (100°C) until completely calcined, a slow process.
- Dimensionally stable under changes in temperature and relative humidity and resists warping, rippling, buckling and sagging
- Features the GridMarX preprinted fastening guide on the board to allow for faster and more accurate installation
- *1/4 in. - Lightweight gypsum board for use over existing interior wall surfaces. Use in double layers to form curved surfaces with short radii*
| Series/Sub-Brand | GOLD BOND® |
|---|---|
| Type | Drywall Sheet |
| Size | 4 ft. x 8 ft. |
| Thickness | 1/4 in. |
| Width | 4 ft. |
| Height | 8 ft. |
| Rating | Fire Resistant |
| Brand | National Gypsum Co |
| Finish | Natural |
| Material | Gypsum Core |
GridMarX provides quick identification and uniform nail/screw patterns. Use GridMarX to make accurate cuts without drawing lines. GridMarX guide marks run the length of the board at five points in 4" (102 mm) increments. Marks run along the edge in both tapers and at 16" (406 mm), 24" (610 mm) and 32" (813 mm) in the field of the board. The marks cover easily with no bleed-through using standard paint products.
Write Your Own Review