Easy Heat 6 ft. Electric Pipe Heating Cable
Brand may very per location
EasyHeat™ AHB automatic electric water pipe heating cable is a pre-assembled and ready to install, cable that prevents metal and plastic pipes from freezing. These units are activated and de-activated by an integral energy saving thermostat. They are suitable for commercial and residential metal or plastic water supply pipes subject to freezing temperatures.
As low as $29.99
each
- Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
- Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
- Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
- Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
- Integral thermostat saves energy by powering the cable only when needed https://www.ringsend.com/easy-heat-water-pipe-heat-cable-electric
| Type | Heat Tape |
|---|---|
| Length | 6 ft. |
| Brand | Easy Heat |
| Manufacturer Code | AHB-016A |
Specifications
- Certifications
- UL Listed to Canadian Safety Standards and CSA Certified when used in accordance with instructions on water filled metal or plastic pipes
- Accessories
- It is recommended to use EasyHeat™ HCA application tape or good quality electrical tape with a minimum +176 °F (+80 °C) temperature rating to secure heating cable(s) to pipes. See EasyHeat™ Pipe Tracing Accessories
Write Your Own Review