ROCK-ON® Cement Board Screw Pro-Pak, #9 x 1-1/4 in., 750 Count
*While supply lasts/Item being Discontinued
Designed for attaching fiberglass reinforced cement board such as Durock®* and WonderBoard®* to wood or light gauge steel framing. Rock-On Screws provide the optimal fastening solution for installing fiberglass reinforced cement boards to wood and steel framing. Rock-On Cement Board Screws conform to ANSI A108.11 Standards for cement board installation.
*Limited stock available
- Flush seating in all cement board when angle driven
- Ability to attach close to edge in all cement boards without fractures or blowouts
- Stikfit™ recess for one-handed driving, while eliminating cam-outs and wobbling
- Premium corrosion-resistant finish to prevent rust from bleeding into grout
| Type | Cement Board Screw |
|---|---|
| Size | #9 |
| Length | 1-1/4 in. |
| Drive Type | Star T-25 |
| Brand | Rock-On |
| Material | Steel |
| Pack Size | 750 Count |
| Manufacturer Code | 23306 |
Application:
- Countertop Installation - 54 Screws/Board
Fasten cement board with Backer-On/Rock-On screws every 8 in. over the entire surface. Keep screws between 3/8 in. and 3/4 in from board edges and 2 in. from board corners.
- Floor Installation - 48 Screws/Board
Fasten cement board with Backer-On/Rock-On screws every 8 in. over the entire surface. Keep screws between 3/8 in. and 3/4 in from board edges and 2 in. from board corners.
- Wall Installation - 26 Screws/Board
Fasten cement board with Backer-On/Rock-On scews a maximum of 8 in. on center at all supports. Keep fasteners 3/8 in. from board edges and 2 in. from sheet corners.
- Ceiling Installation - 30 Screws/Board
Fasten cement board with Backer-On/Rock-On scews a maximum of 6 in. on center at all supports. Keep fasteners 3/8 in. from board edges and 2 in. from sheet corners.