3M PPS Series 2.0, Lids and Liners, Standard Size, Spray Cup System Kit, 22 fl. oz.
The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.
3M™ PPS™ Series 2.0 is our next generation, highest performing disposable spray cup system. New quarter-turn lid locking system locks lid to cup and eliminates paint build up and cross threading. Redesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications. Each standard size lid and liner kit contains 50 disposable liners, 50 standard size disposable lids, 1 PPS Series 2.0 standard size paint hard cup, and 32 sealing plugs use with 22 fl. oz cup system.
- 50 - Liners
- 50 - Lids with (200 micron pre-welded filter) – each lid includes a quarter-turn lid locking system (collar)
- 32 - Sealing plugs
- 1 - Reusable hard cup (26001) – gravity, non-pressure
- 22 fl. oz. (650 mL) standard size
- 200 micron full diameter lid filter (pre-welded filter)
- For use with the standard 22 fl. oz. (650 mL) gravity cup (26001) as well as the large 28 fl. oz. (850 mL) H/O pressure feed cup (26024)
| Type | Spray Cup Kit |
|---|---|
| Size | 22 fl. oz. |
| Style | HVLP |
| Brand | 3M |
| Series/Sub-Brand | PPS Series 2.0 |
| Material | Mixed |
| Manufacturer Code | 2600 |
- Only one PPS™ Series 2.0 cup for mixing and spraying
- Enables painters to mix less paint
- Use corresponding lids and liners for size of application
- Up to 70% savings of cleaning solvent
- Closed system - no outside contamination
- Faster system - from mixing to disposal
- Less operator exposure to solvents and reduction in VOCs
- Spray gun functions at any angle
- Available in multiple size cups
- Use the 3M™ PPS™ Series 2.0 Shaker Core to remove the lid easily
- When removing the lid and liner from the hard cup, twist lid to unlock, place fingers through hole in bottom of cup and push liner upwards, releasing lid and liner together.
- Use the wide base on your 3M™ PPS™ Series 2.0 Cup Sealing Plugs to stand your cups upside down when not in use, helping to keep the filter mesh wet.
- Eliminate traditional mixing cups and filters by mixing materials right inside your 3M™ PPS™ Series 2.0 Cups. Each lid contains a clean, welded-in filter.
- Stock all 5 Kit sizes to always have the right size cup for the job, reducing your cost per use.
- Maintain Compliance with EPA 6H Rule by using the 3oz/90mL size 3M™ PPS™ Series 2.0 Cups.
- Keep your red 3M™ PPS™ Dispensers. They still work with all 3M™ PPS™ Series 2.0 Lids and Liners.