¾ in. Mahogany Plywood, 4 ft. x 8 ft.
Medium texture, high luster, pale yellow sapwood and light red to dark reddish brown heartwood. Sapele Mahogany Plywood is extremely stable and is not subject to movements caused by temperature and humidity changes. This makes it perfect for applications where tolerances are tight, such as door panels trapped within rails and stiles. Not having to worry about a panel cupping and bowing or expanding and cracking a frame is a significant benefit.
As low as $226.55
Piece
- A1 Grade 7 Ply Mahogany plywood
- Cabinet & Furniture grade
- Excellent strength and dimensional stability
- Great screw, nail, glue and staple holding ability on the face; mechanical fasteners do not hold as well on the butt edges and ends
- Sanded with 120-150 Grit for a smooth stainable/paintable surface
- Brand / Grade may vary by avaiability and store location
| Type | Sanded Plywood |
|---|---|
| Thickness | 3/4 in. |
| Brand | Selected Brands |
| Material | Mahogany |
| Plywood Width Length | 4 ft. x 8 ft. |
Plywood grades are (best to worst) A, B, C and D for face or front face. The back grades are (best to worst) 1, 2, 3, and 4. Plywood grades of A1, A2, B1, B2 are a good two-sided product and would be used where both sides are going to be seen. The backside (number grade) does have a few more blemishes than the front. A3, B3, C3 are for plywood that will be seen from one side, but the backside must be clean, although there may be some stain or discoloration on the back, spliced veneer, and so on. One might use this material for the sides of a dresser (who looks inside?), for drawer sides, and shelving. A4, B4, C4 are a one-side-good product. The back may have open knots, filled knots, bad veneer joints or seams. This material will work well for drawer bottoms, and similar.
Write Your Own Review