General Finishes®, Water-Based Exterior 450 Wood Stain, Red Mahogany, Quart
General Finishes®, Exterior 450 Stain is a premium pigmented stain formulated to hold up to the outside conditions of sunlight and excess moisture. High-quality pigments and built-in UV absorbers protect color from fading in sunlight while mildewcides retard mold and mildew growth.
Not recommended as a deck finish.
As low as
$21.89
each
- Exterior Only
- Premium Stain
- UV absorbers
- Low VOC
- Built-in mildewcides
- Brush, Roll, or Spray
| Type | Exterior Stain |
|---|---|
| Size | Quart |
| Color | Red Mahogany |
| Brand | General Finishes |
| Color Family | Red |
| Material | Water-Based |
| Manufacturer Code | B290-L |
Application Conditions: Recommended 70°F and 50% humidity, out of direct sunlight. Variations in conditions and application technique can significantly affect dry times and coverage. Use GF Accelerator in cool or humid conditions. Use GF Extender in warm or dry conditions.
Surface Prep: Always ensure the surface is clean of contaminants and dust. Variations in wood species, prep procedures, and application procedures can significantly affect color. Always test for color before staining your project.
Raw Wood: Sand with no finer than 220 grit, 180 grit sandpaper on open-grained woods.
Pre‐finished Wood: Clean using 50/50 mix of denatured alcohol and water with maroon non‐woven pad. Sand with fine 220‐320 grit sanding foam sanding pad or maroon non‐woven pad.
Other Substrates: Can be used. Always test for adhesion.
Application Tips: Do not apply with a rag or cloth. If stain is drying too quickly, apply more stain to re-wet the surface. For deeper color, a 2nd coat can be applied after the 1st coat has dried completely. Use Pre-Stain Natural for more consistent color on blotchy woods.
System Recommendations: Finish with 3 coats of Exterior 450 clear topcoat in desired sheen.
Write Your Own Review