Benjamin Moore Ultra Spec 500, Flat
A professional‐quality interior waterborne flat finish based on a proprietary cross‐linking acrylic resin that tints on the Gennex® zero VOC colorant system. This waterborne interior flat provides a decorative flat finish that is eligible for LEED® v4 credit.
Low abuse interior wall and ceiling surfaces in
commercial and institutional environments where flat
finish is desired. For new or previously painted interior
wallboard, masonry, and primed or previously painted
plaster, wood or metal.
As low as
$18.19
- Zero VOC
- Excellent hiding
- Low odor
- Great touch up
- Superior flow and leveling
- Decorative and uniform flat finish
- Do not paint when air or surface temperature
is below 50 °F (10 °C)
| Series/Sub-Brand | Ultra Spec |
|---|---|
| Type | Interior |
| Brand | Benjamin Moore |
| Finish | Flat |
| Paint Sheen | Flat |
| Material | Water-Based |
| Manufacturer Code | T535 |
Surface Preparation: Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water soluble materials, and mildew. Remove any peeling or scaling paint and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. Drywall surfaces must be free of sanding dust.
Application: Stir thoroughly before and during use. Apply one or two coats. For best results, use a custom-blended nylon/poly brush, roller or similar product. Apply paint generously from unpainted area into wet area. This product can also be sprayed.
Clean Up: Clean with warm soapy water.
Coverage: 350 – 400 Sq. Ft
Dry Time: To Touch: 1 hour To Recoat: 2 – 3 hours
Write Your Own Review