• Decking & Fencing Brochure
  •     
  • Source Book
  •     
  • Design REsource
  • FREE Shipping for Online Orders Over $150

    Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

    Vermont Natural Coatings POLYWHEY FLOOR MATTE FINISH GAL

    SKU
    PW01250
    In stock

    Vermont Natural Coatings POLYWHEY FLOOR MATTE FINISH GAL

    SKU
    PW01250
    In stock
    $83.99
    Overview
    From the Manufacturer: PolyWhey Floor finish is an evolved clear coating that uses recycled whey protein to make a durable and safe sealer and topcoat in one. Where to apply: Use PolyWhey Floor on new bare wood flooring or previously stained or coated wood floors.
    Product Detail
  • Size:
    Gal
  • Color:
    Clear
  • Mfg:
    101250
  • Name:
    VERMONT NATURAL COATINGS,LLC
  • Additional Information
  • Seals and protects against water and chemicals
  • Clear finish enhances wood grain without yellowing
  • Can be applied over oil-based stain or finish
  • Quick drying— apply three coats in a day
  • Application
    1. Stir well prior to use. Apply full strength with brush, floor pad or t-bar. Thinning may result in reduced performance.
    2. Test the finish on a sample piece of wood to confirm compatibility and desired appearance. For best results apply in temps between 65F-80F with a relative humidity of 40%-60%. Avoid applying in direct sunlight Three coats are recommended for optimum product performance.
    3. Apply thin, even coats taking care to prevent the finish from forming puddles. Overlap strokes and always maintain a wet edge. Finish will dry in two hours under normal conditions. High humidity or low temperature may lengthen dry time.
    4. Sand lightly after first coat with very fine sandpaper (220 grit or finer).
    5. Vacuum dust and wipe with a water-dampened cloth and Vermont Natural Coatings Wood Cleaner. Never use steel wool or a tack cloth.
    6. Apply second coat.
    7. After second coat sand only if 24 hours have passed since the previous coat was applied. Sanding, vacuuming and cleaning between coats will aid adhesion and create a smoother surface.