HOLLANDLAC is a high performance, marine quality enamel, unequalled in its ability to provide maximum protection and depth of color. Now with an even higher sheen, New HOLLANDLAC Brilliant 98 Gloss Enamel possesses a mirror-like luminescence which may be used subtly or dramatically to create focus, space and light. HOLLANDLAC Satin is a high performance enamel paint with a sophisticated, understated sheen. The densely pigmented formulation of HOLLANDLAC provides superior coverage and hiding power. High concentrations of costly, color-fast pigments result in colors that resist fading. HOLLANDLAC White is virtually non-yellowing. However, even the highest quality white oil finishes will yellow in the constant absence of ultraviolet light; i.e., inside of a closet or in a room with little direct sunshine. (See EUROLUX for non-yellowing, gloss white). HOLLANDLAC unique self-leveling and filling properties result in a finish that dries to a beautiful, durable, porcelain-like surface whether applied by brush or spray. Although all paints perform best when applied over a FPE Oil Primer/Undercoat, New HOLLANDLAC Brilliant 98 does not require primer when applied over clean, previously painted oil finishes in good condition. Surfaces previously painted with waterborne paint should be lightly sanded and primed with FPE Oil Primer/Undercoat before receiving a HOLLANDLAC finish.
Surfaces to be painted should be dry, free of dust, chalk, grease, rust and all foreign material which would affect adhesion. Tools: Use a first quality, clean, natural bristle brush. NEVER use a roller to apply this finish to high profile areas as a slight stipple will be evident. New, unpainted surfaces and those previously painted with waterborne finishes: After surface preparation, apply one coat appropriate FPE Primer/Undercoat, use FPE or ECO Primer for wood, Primer AC for ferrous metal, Key Primer for non-ferrous metals and plastics. Primer coat should be sanded with 220 grit paper and tacked clean before receiving two thin, even coats of HOLLANDLAC. Allow each coat to dry overnight. For added durability, apply two primer coats before painting or a third finish coat. On surfaces previously painted with oil-based paint: Surfaces painted with an oil finish, which are sound and do not need significant preparation, may be painted without priming. Apply HOLLANDLAC following a light sanding and thorough cleaning to remove dust and foreign material. Painted surfaces that do require heavy sanding or scraping should be cleaned and then treated with FPE Oil Primer/Undercoat. Then apply two thin coats of HOLLANDLAC . HOLLANDLAC should be stirred well before use and applied in thin, even coats. Under normal environmental conditions this product requires no thinning. Do not apply on exterior work when the temperature is below 40˚F or above 90˚F, or if rain threatens. Work area should always be well ventilated. Drying time: 4 to 6 hours dust free, 16 hours recoatable.
Product Data Sheets