ECO Waterborne Paint is a State-of-the-art odorless, water thinnable urethane-alkyd emulsion. Combines the advantages of both modern acrylic and traditional oil formulations. Available in Brilliant or Satin finishes, both equally durable.
Tools: Use a first quality synthetic bristle brush or "hot dog” type foam roller. New, unpainted surfaces: After surface preparation (sanding, etc.) and cleaning, apply one coat ECO Primer/Undercoat or FPE Oil Primer/Undercoat. If painting exterior wood, moisture levels should not exceed 14%. Primer coat should be sanded with 220 grit paper. Then apply two generous, even coats of ECO. Apply the paint and then walk away. Do not overwork this finish.Sanding between top coats of ECO Brilliant with 220 to 320 grit paper is necessary for adhesion. Sanding between top coats of ECO Brilliant with 220 to 320 grit paper is necessary for adhesion. On surfaces previously painted: Surfaces previously painted with latex paint should be primed first prior to painting. Apply ECO following a light sanding and thorough cleaning to remove dust and foreign material. Painted surfaces that do require heavy sanding or scraping should be cleaned and then primed with ECO or FPE Oil Primer/ Undercoat before applying two generous coats of ECO. Apply the paint and then walk away. Do not overwork this paint – brush it on and walk away. ECO should be stirred well before use. If this finish drags or does not level perfectly it may be thinned slightly with water. Do not apply at temperatures below 40°F or above 80°F or when relative humidity exceeds 80%. Drying time: dust free after 1 hour, Recoatable after 16 hours.