Benjamin Moore's Aura Grand Entrance brings rich, vivid color and exceptional durability to your exterior doors and trim. Inspired by fine European door and trim enamel, Aura® Grand Entrance® cures to a lustrous finish that lends your home a look of elegance and luxury. Specially formulated to retain color integrity and gloss, this enamel is easy to apply, has excellent hide and is available in unlimited colors.
- Rich lustrous finish
- Outstanding durability
- Excellent color retention and fade resistance
- Easy, smooth application
- Available in unlimited colors
- For Interior & Exterior use
- Lifetime Limited Warranty
Primed or previously painted interior and exterior, wood, metal or fiberglass doors, and trim.
Dry Time – To Touch 4 - 6 Hours – To Recoat Overnight
Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water-soluble materials, and mildew. Remove any peeling or scaling paint and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. To achieve the ultimate smoothness new and previously painted substrates should be sanded with 220 grit sandpaper. Benjamin Moore offers a number of specialty primers for use over difficult substrates such as bleeding woods, grease stains, crayon markings, hard glossy surfaces, galvanized metal, or other substrates where paint adhesion or stain suppression is a particular problem.
New surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary. Sanding between coats with 220 grit sandpaper will produce an ultra smooth finish.
Stir thoroughly before and during use. Apply two coats at the recommended spread rate. For best results, use a premium blended nylon/polyester brush, premium Microfiber/Flock roller, or a similar product. Apply paint generously from the unpainted area into the wet area. This product can also be sprayed.
Thin With Clean Water
Clean Up Clean Water