Chat with us, powered by LiveChat

Benjamin Moore ARBORCOAT Stain, Semi Solid

SKU
639
 
 

A premium quality 100% acrylic semi solid stain formulated to penetrate and protect wood, resist abrasion, and beautify wood decking, siding, fencing, shakes and furniture. Its colors are semi solid, allowing some of the color and the grain pattern of the wood to show through.

Residential or commercial applications where a premium quality finish is desired. For exterior use on wood decking, fencing, siding, shakes, and furniture.

Not recommended for hardwood.

As low as $5.99
color wheel Please select a color to see available sizes
  • Provides protection and color without obscuring the grain or texture of the wood
  • The semi solid opacity of this product makes it ideal for reducing color variations in wood without completely obscuring the wood grain
  • Provides mildew resistant coating
  • Scuff resistant
  • May be applied to new, pressure treated lumber. Ideal for softwoods like cedar and pine
  • Formulated to penetrate, protect, and beautify wooden decking and furniture
  • A water repellent coating 
  • Do not apply when air and surface temperatures are below 40 °F (4.4 °C).
More Information
Type Exterior
Brand Benjamin Moore
Finish Flat
Paint Sheen Flat
Material Water-Based
Manufacturer Code 639

Application: Prior to finishing, ensure having enough stain to complete an entire section. Stir thoroughly before and occasionally during use. Stain can be applied by brush, roller, pad applicator or by spray. If the product is applied using a roller or sprayer, it is recommended to back-brush the stain into the wood with the direction of the natural grain. Apply as received in the container. Apply 1 or 2 coats Arborcoat® Waterborne Exterior Stain. A second coat provides optimal performance and uniformity. Wait for the first coat to dry for a minimum of 4 hours before applying the second coat. Please note that multiple coats will affect the opacity of the final finish and obscure more of the natural color of the wood. Multiple coats may also result with the finish having a slight sheen. This sheen will slowly decrease with normal weathering. In can color may differ from the final dried finish. 

Coverage: 300 – 400 Sq. Ft.

Clean up: Soap and Water

Dry Time: To Touch 1/2 Hour – To Topcoat 4 Hours

Moisture content of substrate must be below 15%. Test light colors over a small area for tannin bleed before proceeding.

Write Your Own Review
You're reviewing:Benjamin Moore ARBORCOAT Stain, Semi Solid
Your Rating