ARBORCOAT Semi Transparent Classic Oil Finish
A premium quality semi transparent stain formulated to penetrate and protect wood, resist abrasion, and beautify wood decking, siding, fencing, shakes and furniture. The deeply penetrating formula offers great protection from water, sun and provides a mildew resistant finish. Its colors are semi-transparent, allowing the texture and grain of the wood to show through.
Residential or commercial applications where a premium quality
finish is desired. For application to new wood, pressure treated
lumber and previous applications of stain that have weathered
and are porous.
- Provides protection and color without obscuring the grain or texture of the wood
- May be applied to new, pressure treated lumber that has thoroughly dried
- A water repellent coating
- Specially formulated to resist mildew growth on the stain film
- Scuff resistant
- Formulated to penetrate, protect, and beautify wood decking, siding, fencing, shingles and furniture
- Can also be applied to wood
previously stained with a
transparent or semi transparent
stain that is weathered but is not
flaking or peeling
| Type | Exterior Stain |
|---|---|
| Brand | Benjamin Moore |
| Finish | Flat |
| Paint Sheen | Flat |
| Material | Oil-Based |
| Manufacturer Code | C328 |
Application: Prior to finishing, ensure having enough product to complete an entire section. Stir thoroughly before and occasionally during use. Brushing is the preferred method of application. When applied by roller or spray, back brushing is recommended to ensure a uniform distribution. Apply as received in the container.
Refrain from applying this finish in direct hot sun. Do not apply when air and surface temperatures are below 40 °F (4.4 °C), nor over damp surfaces or during threatening weather.
The opacity of stains is affected by how heavily the product is applied and by the porosity or texture of the wood. Always sample the product on the actual wood surface.
Applying the finish too heavily or applying over a sealed surface will result in slow dry times and uneven finish.
Clean up: Mineral Spirits/Paint Thinner
Coverage: 200 – 350 sq. ft
Dry Time: To Touch 6 Hours – To Recoat 24 - 48 Hours
