A premium ultra-flat solid stain which masks the grain of the wood without obscuring its texture. This durable finish protects and enhances the appearance of new or previously stained smooth or rough siding, manufactured hardboard and fiber-cement siding, shakes, trim, railings, fencing, stucco and masonry. The ultra flat finish minimizes exterior imperfections while maintaining excellent color retention properties.
Residential or commercial applications where a premium quality finish is desired. Use on new or previously stained smooth or rough siding, manufactured hardboard and fiber-cement siding, shakes, trim, railings, fencing, stucco and masonry.
Do not apply to surfaces such as outdoor furniture or decks.
Type | Exterior |
---|---|
Brand | Benjamin Moore |
Finish | Ultra Flat |
Paint Sheen | Ultra Flat |
Material | Water-Based |
Manufacturer Code | 610 |
Application: Immediately prior to use, the paint should be mixed thoroughly even though it has been shaken mechanically by the retailer. Preferred application method is by brushing. Roller application should be done only on rough or textured surfaces. To minimize lapping, always maintain a wet edge. On horizontal siding apply the stain on a section of 2 or 3 boards completely across the house. Lower the ladder and continue in the same manner until the side is completed. Vertical siding is coated using the same principle from top to bottom. Never stop staining in mid-wall; continue until a natural break is reached, such as a window. Refrain from staining in direct hot sun.
Clean up: Soap and Water
Coverage: 200 – 400 Sq. Ft.
Dry Time: To Touch 1 Hour – To Recoat 3 – 4 Hours